Do-it-yourself tire inkler. Inexpensive and easy

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

At the beginning of the new millennium, automotive chemistry has significantly increased its range. Having entered the world market, many global brands created an atmosphere of fierce competition, which had a positive effect not only on lower prices, but also on the quality of the products themselves. Inks for rubber began to enjoy unprecedented demand, which give a rich color not only to tires, but also to plastic products, as well as leather. But there are not so many who want to say goodbye to their money, giving it for a can. There were car enthusiasts who easily make tire ink with their own hands.

Many car owners do not fully understand why it is necessary to blacken the rubber. Some see this as just a way to emphasize the aesthetic appearance of the car. Indeed, the blackened tire looks much "younger" and more attractive, since most of the traces of use can be hidden.

But in addition to the cosmetic function, blackening plays a protective role. Somethe compounds create an oily layer on the treated surface, which protects the rubber from the effects of aggressive components (dirt, s alt, road chemicals, etc.). And also has softening properties, which gives the tire elasticity, thereby slowing down wear.

Today, there are many ways to make tire ink with your own hands. Due to their simplicity and low cost, they are widely used. Let's break down some of the recipes.

Glycerin

Handmade glycerin tire ink is the most popular among car enthusiasts. With a low cost, it may be better than its branded counterparts. To create it, you need distilled water and glycerin, which are mixed in equal proportions. It takes about 200 milliliters of homemade solution to process one tire. The painting procedure does not take much time, and also does not require special skills. We pre-wash the tire, wait until it is completely dry, and proceed to its processing. For blackening, you need a sponge, which must be thoroughly soaked with a solution, and then rub the surface with smooth movements. The effect will be shiny, but short-lived, as the glycerin is quickly washed off.

Laundry soap

This do-it-yourself tire ink recipe is known to more experienced car owners. Many who have lived most of their lives in the USSR know this simple way, thanks to which you can give freshness to rubber. To do this, you need an economic barsoap, moistening which, you can rub the tire. However, do not forget that soap reacts upon contact with rubber, causing the tire to lose elasticity and begin to dry. Overdoing this blackening method can cause your tires to wear out quickly.

Shoe polish or shoe polish

Using shoe polish or shoe creams is a very simple method, but does not have a lasting effect. If you use it, then liquid paints for shoes are best suited. The use of transparent silicone or shoe polish with dark shades is a matter of taste for every motorist. It is necessary to rub the tire with a sponge, on which a small amount of the product was previously applied. In order for the desired effect to last as long as possible, you will have to refrain from driving and wait for the rubber to dry completely.

Liquid Silicone

Hand-made tire ink, the recipe for which includes liquid silicone, causes a lot of controversy among motorists. While some admire this method, others express dissatisfaction that is associated with fragility and a weak effect. As a rule, PMS-200 oil is used to create this solution. The application looks the same as in the case of shoe polish. The rubber has a nice dark color for a long time, but the cost of liquid silicone is higher than that of the components listed above.

Coca-Cola

You don't have to make your own tire inkhands, and go to the nearest store that sells carbonated drinks. Buy a two-liter bottle of Coca-Cola and apply its contents to the rubber. The pleasant effect will last up to 3 days, but on the condition that after application you will not operate the machine for several hours, allowing the soda to dry.

As we can see, you can make a tire inkler with your own hands quite quickly. But in order to achieve maximum effect, it is necessary to pay due attention to cleaning the tire. You can make your own cleanser. To do this, we need ordinary household soda. It must be thoroughly mixed with water, adhering to the proportion 2/1 (soda / water). Once you have a paste-like mixture, wash the tires, then apply the paste to a brush with medium bristles. It is necessary to carefully rub the rubber, and then leave for a few minutes, after which you can wash off the solution.