Rear view camera on ix35: specifications, dismantling, installation, operation

Table of contents:

Rear view camera on ix35: specifications, dismantling, installation, operation
Rear view camera on ix35: specifications, dismantling, installation, operation
Anonim

A bright, solid crossover from the Korean automaker has been traveling on the roads of Asia, Europe and the CIS since 2009, giving drivers comfortable operating conditions. Some complain that the power of 150 liters. With. a little small for style and dynamics, but, according to the engineers, this is a worthy indicator for a moderate and prudent ride. Among the advantages of this car, the ix35 rear view camera deserves special mention, which requires special care to extend its service life.

General information

rearview camera hyundai ix35
rearview camera hyundai ix35

Rescues regular rear view camera ix35 when parking. This is a small device that helps drivers correctly park the car without damaging the bumper. The compact device is a modernized format of the standard parking sensors. Good visibility allows the motorist to see behind the car, preventing a child or a curb from being hit.

The ix35 rear view camera is built into the bumper of the car, and the picturedisplayed on a special screen installed in the cabin, or transmitted to the monitor of the car radio, provided that it can read the video image. What this system includes, we will find out further.

About the design of the camera

rear view camera ix35
rear view camera ix35

Engineers have provided the following configuration of the device.

  1. Image fixing device mounted in the number attachment area.
  2. In the trunk or the driver has a control module.
  3. In addition to the ix35 rear view camera, sensors can be mounted with sensor options that are triggered when the car is near a curb or other obstacle.
  4. A display that is installed on the dashboard of a car.

Why does a driver need a device?

rear view camera for hyundai ix35
rear view camera for hyundai ix35

Engineers have tried and endowed the device with the following positive characteristics:

  • In the collection of benefits, one of the main roles played by the ix35 rear view camera belongs to helping the motorist to stop and park the car in the parking lot.
  • Proper setup and correctly made installation helps not to run into a stone or a person in a blind zone.
  • Installation of the product is simple, does not require special knowledge and special technical skills. Even a beginner can handle the connection.
  • The absence of wires is another important advantage of the Hyundai ix35 rear view camera, which simplifies operation. Installation of the gadget does not require complex wiring and dismantlingupholstery.

Among the shortcomings, some drivers note the rather high price of the device. In addition, not all drivers are familiar with the design features.

Problems with camera

During use, dirt, dust and moisture do their job, adversely affecting the image: it becomes cloudy. Water gets inside the device, blurring the picture, endangering the safety of road users. As a result of emergency situations, glass breaks, cracks.

At car washes in winter, when cleaning a car, a jet under pressure also hits this useful device. As a result, when driving out into the cold, an undried camera freezes, begins to transmit information distortedly, or refuses to function at all. Drivers should warn service workers not to use pressure to clean the area where the device is installed. However, even with careful operation, sooner or later you have to change the device.

Secrets of proper dismantling

rear view camera ix35 original
rear view camera ix35 original

You can replace it with the original ix35 rear view camera or pick up a budget analogue. How is the work done?

  • First, open the trunk, disconnect the battery.
  • The plafond, equipped with a backlight function, is detached and unscrewed. A new rear view camera for the Hyundai ix35 is installed, if the "native" version is purchased, by simply pressing the fastener and fixing the lens.
  • After that, power is connected to the LED. You can make the backlight startfunction when the dimensions are triggered. To do this, the power cable is connected to a disconnected light source, the next step is to synchronize it with the cartridge.
  • Next, you need to start laying the power cable to the reverse light, connect to the green wiring. This color means "+", the black wire is a terminal with a "minus" sign. The video cable is equipped with a red wire, which is connected to the "plus" of the video camera. He is responsible for transferring the picture to the screen.
  • The last step is to route the signal wiring inside the car. To do this, the casing must be removed and the cable pulled through the appropriate holes. The wire connects to the monitor on the center console. It remains to check whether everything works properly.

How to extend the life of appliances?

Features of care for video devices

Device Monitor
Device Monitor

The cameras of even the most ordinary telephones need proper care, not to mention the rear view devices, which constantly have to deal with a lot of dirt and dust. The chemicals used to treat the roads are doing their detrimental work. As a result, a blue splash screen appears on the standard monitor. What do experts advise to prevent the “screen of death”?

  • Before you go to work, you need to take an ordinary napkin, preferably with good absorbent properties, and just wipe the camera. Similar actions can be performed before direct parking.
  • Some motorists don't have time for this. ATin such cases, washers can be installed. Retrofitting is best ordered at a professional service center.

Any device needs careful attention to help prolong its life.

Recommended: