The rear view camera does not work: reasons, how to identify a breakdown

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

If the rear view camera in the car does not work, there is no serious reason for despair. The situation is fixable. The main thing is to find out the reasons and deal with the problem in time. Let's analyze the most frequent breakdowns and the possibilities of their correction using the Hyundai IX35 as an example.

Briefly about the technical device

Before you figure out why the rear view camera stopped working, you need to find out its technical aspects. Then it will be easier to find the answer. The expediency of use comes down to providing good visibility to the driver behind the car. The picture is transmitted directly to the interior, which is convenient during the operation of the vehicle. Connection is made to the standard monitor. You can connect it to a video navigator or a secondary display. Backlighting and changing the viewing angle help the motorist to feel the situation behind the car at any time of the day. Consider how a device is chosen in a store?

About buying principles

Experts advisetake into account the following features of different types of cameras:

• The picture should be transmitted in a mirror image.
• The viewing angle standard is 10 degrees, but in practice it is better to use models with an angle of 150 º or 170 º.
• Adaptation must be resistant to weather conditions. It's important to shop from a reputable store so you don't wonder why the rear view camera isn't working and then spend money on repair services.
• Resolution matters: it affects the quality of the transmitted image.

Typology of rear view cameras

There are a variety of camcorders on the market. At the place of installation, they are presented in several versions:

• Universal-type devices for installation do not require special conditions. Their simple design makes them easy to install. Availability is a significant advantage.
• Complete with license plates, the driver will not have to think about additional installation.
• At the factory, standard devices are mounted in the car.

How video information is transmitted

Let's talk in simple terms about the principles of the camera. Before determining the reason why the rear view camera does not work, it is worth knowing the principles of its operation. Video transmission is possible in two ways:

• The video cable runs to the monitor on the dashboard. The wire is laid through the salon. In this case, the signal is transmitted with high accuracy, notexposed to radio interference. The only negative point is the need to parse the upholstery.
• There is a more convenient wireless installation method. Information is transmitted by radio wave, but the transmission range is only possible at a distance of 15 meters.

Installation of the system is quite expensive, so some motorists prefer to carry out the procedure on their own. Consider why a problem occurs when the rear view camera does not work? How to solve it quickly?

Most Common Problems

The device can be built in different places: in the trunk handle, license plate light, in the cabin. The owners of the latter are more fortunate than other road users, since such cameras rarely break. This is explained simply - in the cabin there is no influence of the external environment, aggressive chemicals from car washes. Why is the rear view camera not working? The main enemy of this device is water.

The ingress of liquid leads to the impossibility of the camera to function in normal mode, to the distortion of information displayed on the screen. Often, auto mechanics are faced with the problem of muddy pictures or a non-working device. The culprit of such incidents is the liquid that has seeped inside. How can I fix the problem?

About how to repair rear view cameras

The owner of the vehicle has two ways: to give it for repair and fix the device on their own. If the machine or installed camera is under warranty, it is recommended that you contactto the masters who know why the rear view camera does not work. Service work will not void the warranty on the car - the car owner will win in this. You can try to fix a car that has come out of the warranty period on your own. What can be done, consider the example of "Hyundai ix35".

Restoration on Hyundai IX35

The crossover is powerful and stylish, but when the Hyundai rear-view camera does not work, there is no need to talk about the normal functioning of the road handsome. The device is mounted in a plastic molding near the license plate lights. The bottom of the molding is a landing pad for a video camera. Wet weather and dirt do their job - moisture collects and causes problems, remaining in the case for a long time.

Another reason why the rear view camera does not work on the IX35 is corrosion and oxides. A good half of the part is made of aluminum alloy. It oxidizes heavily. Most of the time it goes right through. The electrical board becomes unusable, so there is no point in trying to repair something. Only replacement remains.

How to replace the camera on a Hyundai

If the rear view camera does not work on the Hyundai IX35, it is not necessary to install the original models, since it is not forbidden to use analog modifications. To do this, it is important to choose a product with the most identical properties. It is optimal to purchase the option with a plastic case. Sealed installation is not exposedcorrosion. The lower point of the molding can be covered with glue and sealant, then water will not penetrate the fixture board. You can lubricate the case with butyl rubber sealant. In some situations, the camera can be saved. To do this, it is disassembled, cleaned, dried.

Secrets of adjustment

Having installed the device, you have to configure it. The task of the owner of the car is to configure the parking lines. To do this, you need a bar about two meters long. There should be a distance of one meter from the rear bumper to the bar. The edges of the bar should protrude over the sides of the car at an equal distance. Next, you need to get behind the wheel, turn on and off the marker lights. The next step is to enter the menu and select your device brand.

After activating the video camera, the steering wheel should be turned first to the right until it stops, then to the left. On the screen, click on the “next” mark. The monitor will display a rectangular outline.

After that, you need to use the control keys: you need to achieve the location of the bar exactly in the center on the display. Finished with confirmation. A new disassembly will require updating the settings and doing the same manipulations. Which manufacturer takes pride of place in popularity ratings?

Ranking of the most popular rear view cameras

Now let's look at which of the manufacturers takes pride of place in the popularity ratings. Automotive industry experts advise to purchase models of world leaders without fear:

• The Blackview UC-36 product attracts with price tags from 600 rubles. Good light sensitivitymatrices, easy installation - the main advantages. Too bad there is no vertical adjustment.
• For beginners, it will not be a problem to install Rolsen RRV-180. The product has IR illumination, a matrix of 4 inches. The cost will cost about a thousand rubles.
• The AutoExpert VC-206 system is endowed with the ability to rotate around the body, which is not the case with mortise cameras. It will cost more than previous models. According to most reviews, the price is justified.

Reversing camera is the most effective way to improve the quality of safe parking. Timely care, cleaning from dirt and sand will help preserve the properties of the device for a long time.