Do-it-yourself Ford Focus 2 rear bumper repair

Table of contents:

Do-it-yourself Ford Focus 2 rear bumper repair
Do-it-yourself Ford Focus 2 rear bumper repair
Anonim

A bright example of the compact segment of the European level of production was introduced to the world market in the form of a sedan and station wagon, hatchback and convertible. Due to unpretentiousness in maintenance, reliability of mechanical units and mechanisms, the car held the leading position for a long time. Repairs are most often required in the event of an accident. The rear bumper of the "Ford Focus-2" suffered when hitting an obstacle when parking in reverse.

Bumper issues

Rear bumper damage
Rear bumper damage

In life, different situations happen, no one is immune from damage. During operation, some drivers begin to notice that a gap is forming between the headlight and the rear bumper of the Ford Focus 2. At first glance, it seems like a trifle, but the trouble spoils the overall impression of the appearance of the car. The gap reaches a size of approximately 5 mm. There is a legitimate question, where did this gap come from?

Causes of sagging

rear bumper repair "Ford Focus II"
rear bumper repair "Ford Focus II"

Removing the lining of the trunk to eliminate trouble with the rearbumper "Ford Focus-2", you can understand the true reason for this phenomenon in the appearance of the car. As a result, a broken plastic guide piece mounted in the body hole is to blame. There is only one way out of this situation - you can use Moment glue and glue the hairpin by putting it on a short bolt. This is just one of the problems encountered with the rear bumper on this foreign car.

Difficulties more serious have to be solved in more radical ways. Repairs may be needed if the Ford Focus 2 rear bumper hits or hits a curb. First, you should understand what type is mounted on a foreign car.

About bumper style

original bumper
original bumper

For each modification, you need to look for the original bumper by the corresponding values in the catalog. On Ford Focus-2 sedan models, the manufacturer suggested using a rear bumper marked in the ST FDA 5087A0 catalog. For the station wagon variant, this will be the "FD043227 BA" model. Hatchback drivers should look for "FD043326BA" in case of upcoming repairs.

Genuine parts are very expensive. If you want to save money, auto mechanics advise similar components. There are worthy products of well-known brands that you can use on the world market. These are Ford Focus 2 rear bumpers from Tyg, Atek, Norden or Polcar. The cost of products is dictated by the quality characteristics of the casting used, materials, complexity of work, qualityplastic. How is this part removed on Ford Focus II cars?

Dismantling tricks

Algorithm for repairing the rear bumper "Ford Focus 2"
Algorithm for repairing the rear bumper "Ford Focus 2"

Before repairing the Ford Focus-2 with your own hands, it does not hurt to familiarize yourself with the following algorithm of actions.

  1. Mud flaps will interfere with work, so they must be removed.
  2. Going down the car: you need to wrap the wiring harness box of the reverse optics and fog lamp.
  3. Shoe fasteners should be squeezed a little and disconnect the shoe.
  4. It's the turn of the screwdriver again: it needs to pry the fasteners for the rear lighting and fog lamp wiring harness.
  5. The side member of the body part should be unfastened.
  6. Turning to the bottom of the bumper. On both sides, you need to unscrew the clips of the caps and bumper mounts.
  7. Pistons will have to be removed by prying with a screwdriver.
  8. From the inner surface of the wheel arches, the nut fasteners are unscrewed, which are responsible for connecting the body and bumper parts.
  9. The tailgate must be open. Next, you should unscrew one screw of the latch located at the top, coupling the body with the bumper.
  10. Make a movement towards yourself and remove the detail of interest.

To replace with a new element, it is important to remove the rear driving lights and fog lights and attach them in place in the new bumper. Dismantling this part of the car is required when replacing it, but what about ordinary scratches?

Scratches and abrasions on the coating are inevitable. They are received by the "steel horse" from those flying fromroads of stones, when branches are touched during off-road driving, when “meetings” with curbs. Do not rush to go to a car service, you can repair the Ford Focus-2 restyling equipment with your own hands. A special marker is purchased in the automag.

Next, you will need to clean the surface by degreasing it with alcohol. Dirt and dust traces should not remain. With light pressure on the marker, a line is drawn along the scratch. The method is simple and cheap compared to car services. Small scratches are visible in the sun and they are eliminated in a slightly different way.

Fixing minor scratches

Processing with polish
Processing with polish

The coating can be treated with a polish. The chemical formula of the substance penetrates deeply, eliminating the appearance of your favorite "swallow" from the trouble. The reducing agent is good because it will not be washed off in car washes, forming a thin protective film. Plastic bumpers can be polished with specialized equipment, which can be bought in the store among the spare parts for the Ford Focus-2 restyling, after consulting with the seller about the choice.

Effective crack repair tips

The fastest and cheapest way to repair cracks is to use a hot air gun. A device with a power of 1,600 watts is bought. Temperature adjustable up to 700 degrees. The universal rod is suitable for almost all types of plastics. It is better to rent or buy a heat gun with overheating protection.

The edges of the cracks need to be fixed with clamps and grabbed with a soldering iron. In a similar way it followsinstall the broken pieces of the bumper. With a soldering iron, the defect is somewhat deepened and a welding rod is inserted into it. At the same time, you will have to work with a hairdryer and a soldering iron. Do-it-yourself repairs are easy, given the above techniques.

Recommended: