What is a homemade caterpillar?

Table of contents:

What is a homemade caterpillar?
What is a homemade caterpillar?
Anonim

Russia is famous for its craftsmen who can not only repair a car with their own hands, but also develop and manufacture home-made tracked vehicles.

homemade caterpillar
homemade caterpillar

One idea - a homemade caterpillar. But for its implementation, very different approaches and solutions are used. However, it is the creation of the caterpillar itself that brings a lot of trouble to enthusiasts. Many in this case resort to a solution in the simplest way: they purchase devices manufactured by the factory and install them on their all-terrain vehicle. But, you see, there is nothing more pleasant than to bring your idea to life with your own hands, including making your own devices for your car. Below are some of the most effective ways to make caterpillars with your own hands.

The easiest way

A self-made caterpillar for an all-terrain vehicle or a snowmobile with a light weight can be made on the basis of a simple bush-roller chain and a conveyor belt. Yes, and it is very easy to do, there is no need to purchase a special tool.

homemade caterpillar tires
homemade caterpillar tires

In order for such a homemade caterpillar to servelonger, it is necessary to sew the edge of the conveyor belt with fishing line. Step - about a centimeter. This procedure will help protect the tape from "fraying". But you can connect it into a ring in any way that is acceptable and accessible to you. Less reliable is to simply sew the ends of the tape together. Most often, it is advised to use a hinge like a piano hinge.

But the thickness of the tape depends on the power of the engine installed on the all-terrain vehicle. An indicator of 8 to 10 mm will be appropriate if you use a motor from a domestic motorcycle.

A device made in this way is well suited for operation on a snowmobile. Plus, such a homemade caterpillar is easy to repair and replace in case of damage. This greatly simplifies the process of operating your invention.

homemade caterpillar for an all-terrain vehicle
homemade caterpillar for an all-terrain vehicle

Tire tracks

Many craftsmen make highly passable devices from car tires. To do this, it is best to take tires from a truck with a characteristic tread pattern.

How can a homemade caterpillar be made? Tires need to be processed. To do this, we cut off the bead from the tire, thereby leaving only the “treadmill” tape. This process requires a lot of strength, because it is laborious and quite heavy.

To facilitate the work, you can moisten the blade of the knife in soapy water, which makes it easier to cut the rubber. If it is difficult to work with only this device, then you can use an electric jigsaw with fine teeth.

After you cutfrom the tire bead, if necessary, remove the excess layer from the wrong side. Then you can cut another grouser structure that satisfies you.

This homemade caterpillar has great advantages over the one described above. It has a closed purl contour and, therefore, higher reliability. This guarantees increased safety and durability.

Recommended: