Overview of ways to lower a car

Table of contents:

Overview of ways to lower a car
Overview of ways to lower a car
Anonim

This article is a review article. It discusses the general ways how to underestimate the car. It is not possible to technically explain in a few words and give specific advice on vehicle modifications.

Changing suspension height: pros and cons

To the question: “Why are cars understated?” - the following answers give.

  • how to lower a car
    how to lower a car

    She will drive faster, racing cars are low.

  • Machine will be easier to drive.
  • This is beautiful.
  • It's trendy.

In order for the speed of the car and ease of control to bring your own vehicle closer to a racing car, you will have to invest in it a sufficient amount of money. Only an expensive modification can improve the quality indicators. It is unlikely that VAZ owners can afford such re-equipment.

Improve driving performance? Driving with a low suspension on Russian roads is dooming the car to rapid wear and tear. Potholes will touch the bottom and this is unlikely to increase speed.

Beauty and fashion… There is nothing to argue about. Everyone chooses the design of the car for himself, and if a low car is a dream, then there is nothing to say against this argument.

We decided to underestimate - we are looking for ways.

Ways to lower the car

Summary of ways to lower a car.

  • Air suspension is the most effective way, but also the most expensive.
  • Installation of a special suspension, in which you can independently adjust the clearance. A set of special springs is included with the suspension.
  • Installing a factory-made suspension. The springs are already installed.

The above methods require economic costs. And how do those who want to save money lower the car?

  • Install short springs without changing dampers.
  • Cut the springs.
  • They lower the height of the car due to low tires and even constantly carry a bag of cement with them in the trunk, remove “extra springs”.

Who can help improve the vehicle?

why cars are lowered
why cars are lowered

Where can I lower the car? Those who have the opportunity to purchase a vehicle “to order” receive an underestimated factory-assembled car. That factory modification is expensive, no need to explain.

It is possible to mount a lowered suspension with high quality at the service station, where they can also reinstall the springs or cut them off. Some people cut springs and improve in their own garage.

Loading something heavy in your own trunk to reduce ground clearance does not require a special room or qualifications.

Lower suspension properly

Before lowering the suspensioncar, it is worth remembering that the designers of the model provided for the optimal combination: reliability-compliance, so you need to carefully familiarize yourself with the technical characteristics of the car.

Violation of the installation of the suspension can cause deformation of the entire structure. Having decided to reinstall the suspension, it is better to spend extra money, but buy a kit along with factory springs, provided for installation in a specific working unit.

When cutting the springs yourself, even after reading the manual, you need to keep in mind: spring sensitivity and strength change during modification. And it's hard to predict how.

If there is an opportunity to turn to professionals, do not neglect it.

Lower springs

where can i lower the car
where can i lower the car

If, after learning how to lower the car, the choice is made towards shortening the springs, then you need to have an idea of the difference between a shortened spring and a factory-made part.

The appearance of the car from what springs are there does not change. But while driving, installing your own cut springs, you feel uncomfortable. The car vibrates, you feel every pothole on yourself. The car becomes unusable very quickly, the suspensions are destroyed, the body is deformed.

Factory pendants are made of high-strength steel by cold winding. Due to their special strength, they take up the shock load for a smaller suspension compression stroke and work without shrinkage. Their service life is longer than that of circumcisedsprings, and thanks to their installation, the machine is not deformed.

Prefabricated springs can be selected according to the brand of machine to be modified. They do not add weight to the car and improve its driving performance, do not interfere with rapid acceleration and do not increase fuel consumption.

understated cars photo
understated cars photo

Of course, when installing such springs, you need to think about the shock absorber. It is desirable that the modification and re-equipment of the car be carried out by professionals.

Some people like lowered cars. Their photos are placed at their head, and the ground clearance of their own car is lowered, they think that a tall car is unaesthetic. Someone believes that understating cars is unjustified, especially in off-road conditions. Everyone decides for himself.

But you need to remember that lowering the car should not pose a danger to those who are driving or to others. And this only happens when the modification is done well.

Recommended: