Rating of active foam for car washing. Foam for washing the car "Karcher": reviews, instructions, composition. Do-it-yourself car wash foam

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

It has long been known that it is impossible to clean a car from heavy dirt with plain water. No matter how hard you try, you still can't achieve the desired purity. In order to remove dirt from hard-to-reach places, special chemical compounds are used to reduce surface activity. However, they also cannot reach very small cracks and corners. You have to rip them off by hand. And this is very bad for the condition of the paintwork. In order not to damage the appearance of the car, a touchless car wash is used.

It allows you to get a perfectly clean surface without machining the coating. The process uses car wash foam. Its name comes from its good cleansing properties and excellent foaming properties.

What is this?

Foam for washing a car - a group of shampoos with enhanced detergent properties onbasis of alkaline solutions and chemical compounds. It does not mechanically damage the paint surface and well eliminates dirt of almost any complexity. Thanks to this, the appearance of the car is not exposed to fine abrasive, which is always present in a manual car wash.

Active car wash foam is a solution that has a high penetrating power. It spreads poorly and remains for a long time on vertical as well as inclined planes. This allows it to remove dirt from surfaces where regular shampoo and water do not linger.

Science does not stand still and invents new additives that allow you to wash your car even better and safer. That's why touchless car washes are so popular.

Car wash foam. Instructions for use

The process is not difficult and any car owner can use it. Foam is applied using a special device - a steam generator. This device is connected to the pump and has a high power. It gives a large amount of foam, which consists of small cells. This allows her to get into even the most remote and inaccessible places. These are moldings, grille and air intakes.

Any contactless car wash foam has instructions for use. It describes the following main steps:

1. Applying detergent withusing a foam generator on the vehicle. It can be a car, truck or motorcycle.
2. Exposure of the required amount of time. It is necessary for the penetration of the detergent into the pollution and its splitting. Takes half to two minutes.
3. Flushing out detergent with a high pressure machine.
4. To speed up drying, to create a protective layer and to make the surface shine, it is necessary to use products with polymer wax.
5. Car rinse.

Safety rules

In the process of applying the foam, you must follow all the tips and points indicated in the instructions. This will help to safely clean painted surfaces, as well as plastic or rubber products.

To avoid stains that are very difficult to remove later, do not allow detergent to dry.

• Do not apply foam to hot or sun-heated parts of the car.
• Not recommended for surfaces that have been recently painted or varnished (minimum 3 months).
• To prevent water stains, the surface should be wiped with a special cloth. Microfiber is used for glasses. Places inaccessible for manual removal of liquid are blown with compressed air.
• The detergent is used strictly in accordance with the instructions and technology. It should be diluted in the recommended proportions.

In accordance with the requirements applicable to a touchless car wash, you should constantlyventilate the room, and use personal protective equipment. Thanks to this, car wash foam is absolutely safe for workers.

Pros of a touchless car wash

Contactless washing was appreciated by many people. Their reviews are more often positive, among the main advantages are the following:

1. Saving and reducing the time needed for one person's work.
2. Reducing costs by using a small amount of electricity, water, and human resources.
3. Ability to serve more customers.
4. Quality removal of dirt in hard-to-reach places.
5. No machining saves surfaces for longer life.
6. Protecting the paintwork from dust and dirt with a wax film.
7. Sustainability. Detergents and car wash foam have a quick period of complete decomposition into environmentally friendly components.

Composition

The product should not only wash any kind of pollution, but also be safe for the human body. High-quality foam for washing a car, the composition of which is non-toxic, must contain NAOH alkali. However, unscrupulous manufacturers often replace it with another one, which leads to diseases of the nasopharynx and lungs in humans.

In order for the ecological system not to suffer from waste, the composition of the detergent should consist of substances that, after decay, do not pollute nature.

The basis of the detergent is shampoo. Except him,active foam must have the following components:

• Additives that give the coating anti-corrosion properties.
• Surfactants of several classes.
• Solvents and rinse aids.
• Alcohol esters and other useful additives.

Used equipment:

1. High pressure washer.
2. Foam generator.
3. Pistol and spear.
4. Compressor.
5. Detergents and wipes.

The basis of a contactless car wash is a foam generator. It is a container in which the detergent dissolves. It forms foam under high pressure. A pistol is attached to the device. When the pressure is reduced, the finished foam is ejected through it.

The device costs a lot of money and is used in professional car washes. And what about people who do not have big finances, but who love a clean and beautiful car? The answer is simple - to make a foam generator yourself, with which you will use self-made car wash foam.

Such a device will be indispensable for any motorist. In addition, additional features can be added to the design of the device. This is water heating and the ability to adjust the power level.

But the cleanliness of the car depends not only on quality equipment. Special washing shampoos are needed, which contain reagents that give high-quality foam.

Production recipe

This type of car body cleaning is based on surfactants. They can make up to 30% of the total detergent volume. This is due to the fact that they remove the most severe pollution.

Also, to make car shampoo, you need water. It should have a pH value of 7. This acid and alkali content allows the product to safely come into contact with chrome, varnish, plastic and rubber.

The next necessary ingredients are complexing agents. They allow the detergent to become more fluid and penetrate into hard-to-reach places. Among them are:

• Frother. With it, the detergent dissolves dirt better.
• Additives and other additives. These are silicone resins, polyphosphates and other substances.
• Anti-corrosion additives. Allow the surface to resist rust.
• Substances that make car paint dry faster.
• Polish. It happens silicone or wax.
• Fragrance. It neutralizes all unpleasant odors.

Mix the components carefully and in proportions that will not allow the content of any substance to be exceeded. Depending on the concentration of the resulting solution, it should be diluted with water. If there is not enough experience, or there is a risk of damaging the coating, it is recommended to contact professionals.

Rating active car wash foam

To determine the best detergent, you need to conduct tests and trials that will show their quality and speed of removing dirt. For creatingshampoos of equal conditions, they should be used on the same cars with the same degree of pollution or on the same parts of the body.

The solution from the concentrate should be diluted with liquid in the proportion indicated by the manufacturer. Then process the car and evaluate its cleanliness.

It should be remembered that immediately after washing the surfaces will not be in perfect condition. It is worth waiting a little, and then the result becomes visible.

However, one comparative wash is not enough to know what place the car wash foam will take. Feedback from ordinary car owners is also taken into account. After all, they have no benefit in advertising any means. For people, the main thing is maximum cleanliness for minimum money. Therefore, taking into account all the arguments and opinions, the rating of active car wash foam has become the following:

1. Grass Active Foam.

2. Karcher rm 806.

3. HI-GEAR HG8002N.

4. CLEANOL.

Let's take a closer look at these detergents.

Grass Active Foam

This detergent is designed for touchless washing and is a weak alkaline concentrate. It easily copes with heavy soiling, as well as engine oil and fuel stains, dust and insect marks. When used, it is easily removed with plain water and does not destroy the coating.

The composition includes water, surfactants, alkaline and anti-corrosion agents, active additives, as well as various complexing agents.

Before starting work, the detergent should be diluted in the right proportions. One passenger car will require from 80 to 150 grams of the substance. It depends on its degree of contamination. For foam generators, the agent is diluted with water in a proportion of 20 or 30 g per liter of water. For foam kit - from 300 to 500 gr.

Before applying the product to the car, you need to remove the top layer of dust and dirt. Then, starting from the bottom, the active foam is evenly distributed. Wait 1-2 minutes. It is important to do everything without smudges and prevent the detergent from drying out. After the active foam has dissolved all the dirt, it must be washed off. Water is supplied under high pressure at a distance of 15 - 25 cm.

The remedy is an irritant. In case of contact with skin or eyes, rinse with water and seek medical attention.

Shelf life is 3 years.

Kärcher Car Wash Foam

Detergent RM 806 is made in Germany and is designed to remove dirt from vehicles, vans, vans, as well as awnings and engines in a non-contact way. Foam can clean the most stubborn dust, oil stains, tar, insect marks and even clay.

The components included in its composition do not violate the integrity of the paintwork, and also decompose into biologically safe substances.

The concentrate is diluted in proportions 1:3 and applied with a foam tank. The surface does not need to be pre-moistened with water. Dirt removal time andits splitting is 3-4 minutes. After that, the product is removed with high pressure water.

While using detergent, be sure to follow safety precautions and wear protective equipment. Avoid contact with food, respiratory tract and mucous membranes.

Reviews from car owners are positive and negative. After studying them, you can highlight the main pros and cons:

1. The brand is one of the most respected in Russia.
2. Requires proper use according to instructions.
3. Fast reaction to break down dirt.
4. Excellent foaming when diluted in the right proportions.
5. Does not leave stubborn stains.
6. Does not precipitate during long storage.
7. Kärcher car wash foam not applicable on polished aluminium.
8. On materials sensitive to alkali, requires a preliminary test check.
9. There is a rumor about a strong allergic effect on the body when washing without protective equipment.
10. Requires air sprayer. When applied through a non-standard nozzle, the foam is too thin.
11. Do not mix with wax.

HI-GEAR HG8002N

Detergent received a new canister, as well as a modified composition. Now it meets all specifications and qualitatively removes dirt from the most inaccessible places. Starting from moldings with a radiator, and ending with microcracks on the car body.

The tool allows you to get a safe active foam for all surfaces, rubber and plastic parts. When rinsed with water, it is easily removed and does not leave smudges.

The manufacturer guarantees a quality wash even with very hard water.

Cleanol car shampoo

Concentrate "Cleanol Tankist" is a slightly alkaline two-component agent that is used for contactless washing. It got its name because of the advertising move, where a real tank was washed from dirt with the help of a product. It allows:

• Remove dirt at any time of the year.
• Depending on the concentration, suitable for different surfaces.
• Won't streak or harm paintwork.

Foam for washing the car "Tankist" is packaged in containers of 1, 5 and 20 kg.

Before starting work, stir the liquid. For foam generators it is diluted in a ratio of 1:6. Heavily soiled surfaces should first be cleaned with a high-pressure water jet.

In the summer season, the foam is applied to the dry car body, and in the winter it must be moistened.

It is not recommended to use the composition in the open sun. Wash in the shade for 2-3 minutes without allowing the lather to dry completely.

After splitting the dirt, all active foam is removed with high pressure water.

During operation, you should use tools toprotection from chemicals. In case of contact with skin or eyes, rinse with water and seek medical attention.

Product may freeze during storage. After thawing, it retains its original properties.

Reviews about this tool are mostly positive.

Horse "Active foam"

This is another representative of detergents. The difference is that this is a can of car wash foam, which, according to car owners, is very convenient.

This foam is designed to remove gasoline and oil stains, tar and insect marks from surfaces, as well as clean discs.

Does not contain impurities that leave stains on the body.

Refreshs paintwork and makes tires blacker.

A cylinder is enough for 1-2 washes - the main drawback that branded car wash foam has. Customer reviews confirm this, although the manufacturer assures that the funds are enough for a longer period. Therefore, you won’t be able to save money, because after a couple of uses you will have to purchase a new can. While, by purchasing a concentrate weighing 5 or 20 kg, you can provide yourself with detergent for a long time.

Active Foam is a great choice for car enthusiasts who don't want to drive in a dirty car but are afraid of damaging the exterior. It can be used both in specialized car washes and in your garage. It is enough to purchase minimal equipment and have some free time. The main thing is to remember safety precautions and notoverexpose the detergent on the car.