2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Sooner or later, every car owner is faced with the repair of the brake system of his car. Brake maintenance doesn't always end with pad or fluid replacement. In case of severe wear, the installation of new brake discs is required, with the choice of which often there are problems.
About TRW
The plant has been producing seat belts, SRS airbags, electrical units for security systems since 1901. After the purchase of Lucas in 1999, the extensive list was replenished with components for braking systems and car chassis components.
Brake discs "Lukas" and "TRV" (reviews of which are always positive) are available for both new and used cars. When buying spare parts from Lucas, you can be sure of the quality of the product, because this company has become a leader among the leading manufacturers in Germany.
Only the finest materials and friction compounds are used in all Lucas and TRW brake components. After installing the product brakethe properties of the car are significantly improved and become more reliable. To achieve the full effect, you must use all components from TRW or Lucas: brake discs, fluid, pads, caliper guide lubricant.
The main requirements that every TRW employee puts into the product: high level, modern developments, exceptional safety.
How to choose the right brake discs
Brake components should only be purchased from an authorized TRW dealer. Otherwise, you can run into a fake that does not meet the requirements of safety and wear resistance.
Reviews about TRW brake discs are mostly positive, but there are dissatisfied responses in the form of behavior or cracked parts after driving through a puddle. This "behavior" of the part indicates the use of low-quality metal in the production process and means that a counterfeit product was installed.
You can distinguish fake products by a special QR code or by a detailed inspection of the packaging. Printing of all letters and elements must be clear, not smeared. The font should go without sharp breaks or changes in the slopes of the letters. Also, there are no stamps of the EAC Customs Union on the fake, and the image of the rear of the car is significantly different. The original product contains an insert with detailed instructions. If there is none, then there is a high probability that it is a fake.
Original pads and discs can be safely purchased only from an authorized representative. In other cases, a visual check of the product for counterfeit should be carried out.
Car enthusiasts often purchase TRV brake discs. User feedback confirms the good performance, high corrosion resistance and reasonable cost of the product.
How to tell if a drive needs to be replaced
Checking the brake system should be carried out during the seasonal tire change and at the annual MOT. Disc wear can be determined by several components:
- visual component;
- changes when the brake pedal is pressed.
A worn disc has a pronounced edge on the outer radius when visually inspected. It is also often possible to notice deep scratches, rusted areas. Often, car owners want to save money and give a heavily worn part for a groove. In this case, the edge is removed and the working surface is leveled, while the thickness of the disk is significantly reduced, which is fraught with cracks and rapid overheating.
If, when braking, there are shocks to the pedal, extraneous sounds or beating of the steering wheel, then this is the first sign of worn discs. Due to temperature changes, the part begins to change shape, and the braking efficiency is significantly reduced. Drivers who have installed new TRV front brake discs note in their reviews a significant reduction in braking distance, the absence of an extraneoussqueak and vibration of the steering wheel.
Resource of brake discs
The durability of the brake system depends on the operating conditions and driving style. On average, standard brake discs require replacement at a range of 45,000 to 80,000 kilometers. On the Internet, you can find reviews of users who have driven more than 200,000 kilometers on "native" discs, but in this case, the manufacturer cannot claim that the brake system is working correctly.
Reviews of TRV brake discs indicate that the discs provide a guaranteed mileage of 75,000 kilometers when using original pads and other system components. The appearance of corrosion points begins after 4-6 years of daily operation, depending on climatic conditions.
Reviews on brake discs "TRV"
On the net, the most common reviews are about increased mileage, a significant reduction in braking distance, as well as a clear response to the brake pedal.
All TRW components are carefully crafted and tested for compatibility. When self-repairing, the parts sit perfectly in the seats, do not have notches and burrs.
In reviews of TRV brake discs, consumers note the high quality of the metal, corrosion resistance, and high-quality packaging. Car owners are also advised to drive about 500 kilometers in a quiet mode so that all components get used to and go into optimal operation mode.
Recommended:
CDAB engine: specifications, device, resource, principle of operation, advantages and disadvantages, owner reviews
In 2008, VAG group cars entered the automotive market, equipped with turbocharged engines with a distributed injection system. This is a 1.8 liter CDAB engine. These motors are still alive and actively used on cars. Many are interested in what kind of units these are, are they reliable, what is their resource, what are the advantages and disadvantages of these motors
Powder coating discs: reviews. Do-it-yourself powder coating of discs
Demanded service in the automotive environment has become the restoration of the appearance of the wheels. Powder coating alloy wheels is in high demand and is the best way to restore the car to its former glory
Where and how to pierce brake discs? Grooving of brake discs without removal
The brake system of a car requires regular maintenance. In particular, this applies to replacing brake pads, inspecting discs for defects, changing fluid, etc. But far from always this is done on time and is done at all. Many turn to the service station only in case of obvious malfunctions. But all this can be avoided if you change the pads in a timely manner and do not forget to grind the brake discs
Brake discs for Priora: selection, installation, reviews. LADA Priora
The brake system is an important part of any car. Lada Priora is no exception. It is important to monitor the correct operation of the elements and, if necessary, replace them. What brake discs to put on the Priora and how to replace them with your own hands? All this and more - further in our article
Original brake discs "Lacetti" rear and front
"Chevrolet Lacetti" is a budget car, which is often found on the roads of Russia, Europe and the USA. Car enthusiasts choose sedans, hatchbacks and station wagons for their reliable engine and simple suspension design. Repair and maintenance is most often carried out in garage conditions with the help of reference books and other supporting literature. Many users are concerned about the replacement of brake discs in the Lacetti and maintenance of the entire system as a whole