2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
The operation of car systems is associated with increased load, friction of moving elements. To ensure the normal operation of the equipment, it is required to use special consumables. Revitalizants are a popular tool today to avoid wear of metal structures. These components are additives. They are added to consumables to improve vehicle performance.
Additives "Hado" are a popular product that belongs to revitalizants. It has a certain set of properties. To draw a conclusion about the need to use the presented additives in the systems of your car, you need to consider their main characteristics.
Manufacturer
"Hado" is a joint production of the Dutch and Ukrainian companies. The brand entered the automotive market in 1991. The main production facilities are located in Kharkov.
Hado additives, the price of which is quite high,caused a lot of controversy and discussion. When creating them, the manufacturer introduces its own scientific developments that allow you to restore the work of worn parts and mechanisms. Today, revitalizants are produced for almost all components of automotive equipment, motorcycles.
The brand "Hado" appeared on the domestic market in 2004. The manufacturer presented them as a panacea for all problems associated with the wear of mechanisms. Old cars, according to the creators of additives, work like new ones. Their performance is improving.
Features of additives
Additives "Hado" for the restoration of the engine, gearbox and other components have a certain principle of action. They are also called atomic oil. These additives are commercially available as high viscosity oils. It contains special revitalizant granules.
Additives are sold in small containers (about 225 ml). This is enough to ensure the correct operation of the nodes and mechanisms. The granules contained in the substance enter the system. They are transferred by the oil that is in it to all the details. At the same time, revitalizant granules have a protective function.
When a microcrack is found, abrasions of the surface of parts, additives are activated. Under the influence of high temperatures and friction, the cermet layer builds up. As soon as the protective coating is formed, the material accumulation process stops.
Benefits
Reviews on additives inthe Hado engine, as well as other systems left by professional technologists, are positive. The components that make up the additives are created on the basis of cermets. Substances like these allow for good glide with minimal impact on mechanism surfaces.
In additives, revitalizants are in the form of granules. This allows them not to react with the components contained in the base oil. Otherwise, the reaction of regular lubricant to such a tool could be unpredictable. It is likely that the additives would conflict with each other. However, in the case of using revitalizant granules, such a reaction is not observed.
To ensure the full distribution of metal-ceramic granules throughout the system, it is required to turn on the motor after pouring the product. The engine should run for 15 minutes at idle. During this time, additives will be able to settle on the surfaces of rubbing pairs and begin to have their beneficial effect on them.
Varieties
The choice of revitalizant depends on the features of the vehicle, as well as the unit for which the agent is intended. On sale are products for engines of cars, motorcycles, manual and automatic transmissions, power steering, fuel equipment and cylinders.
Packaging of additives is carried out in accordance with its intended use. For example, for motorcycles, products with a volume of only 4.5 ml are on sale. Themthe cost is about 100-120 rubles.
The price of additive "Hado" in the engine depends on the type of engine. In accordance with this indicator, packaging from 8 to 950 ml is used. The cost of such products varies from 740 to 9500 rubles.
For fuel equipment, products from 8 to 225 ml are on sale. The cost varies from 1000 to 2500 rubles.
Application Features
When choosing Xado additives for a gearbox, engine, cylinder block or other components, you must carefully read the manufacturer's instructions on the rules for using such products in such components.
Experts say that for the full impact of the presented components on car systems, the vehicle must travel from 1500 to 2000 km. Therefore, before refueling additives, it is necessary to take into account how long the regular oil has been in operation.
If the lubricant needs to be replaced soon, pouring cermet granules into it will be inappropriate. If you change the consumable before the specified time, it will not have a sufficient effect on worn mechanisms. The cermet layer simply does not have time to grow. Only after a sufficient period of operation of the additives can the oil be changed. In this case, the ability of surfaces to regenerate remains for a long time. Re-filling will be required after 60-100 thousand kilometers.
Expert opinions
Hado additive for transmission, fuel system, engine, etc. must be properlyapplied by the vehicle owner. In addition to ensuring sufficient mileage of the machine, the norms for adding additives to regular oil should be observed.
Experts argue that it is inappropriate to use more cermet granules than the manufacturer has set. Also, do not shorten the period between the first and second filling of the additive system. It will turn out to be a waste of money.
There is a clear dosage that the manufacturer specifies. For 4-5 liters of ordinary oil, only one standard bottle of additives is required. If there are more granules in the system, they simply form a reserve. It will not activate, improving the geometry of metal structures. Such components will only be able to actively act on friction surfaces when the need arises.
Recommendations
Car and motor vehicles are a complex system. It consists of many nodes and components. To ensure their reliable functioning when using Xado additives, it is recommended to undergo a full diagnostic before adding additional protective agents to the system.
It happens that failures in the operation of equipment occur through no fault of worn-out rubbing metal pairs. To determine the cause of deviations, it will be necessary to enumerate all systems. Perhaps the metal of the parts does not meet the established requirements. In this case, the use of cermet-based additives willimpractical.
In order not to waste your money for nothing, it is necessary to exclude the possibility of the presence of other malfunctions. Only in this case, the presented additives will work fully. The effect of their use will be tangible.
Technology
Reviews of Xado additives for gearboxes, cylinder blocks and other vehicle systems indicate the high quality of such components. When used correctly, the granules have a consistent effect on rubbing pairs.
When mechanical damage occurs, characteristic traces appear on the metal. A streak appears. The revitalizant gets on the damaged surface. Its maximum effect occurs in the zone of the strongest wear. Here, a sufficient amount of excess energy is determined for the consistent implementation of the recovery process. The metal in this area has the largest number of free bonds. It is these uncompensated matter atoms that attract cermet granules. They serve as building material.
Thanks to the presented process, a kind of patch is formed at the site of a chip or damage. Relationships are stabilizing. At this point, the growth of the cermet layer stops. The protective layer is subject to diffusion. This allows for a very strong new coating.
Negative reviews
Reviews about additives in the Hado engine are mostly positive. However, there are also negative comments. Some drivers do not recognize any oil additives at all, includingproduced by the Hado brand.
Negative reviews, according to experts, are caused either by improper operation of ceramic-metal additives or other system malfunctions. For example, this could be caused by burnt pistons or worn out oil pumps. Also, failure of the crankshaft journals and liners can cause poor performance of the additives.
To avoid such troubles, as mentioned above, you should first diagnose the car. In some cases, it will not be possible to do without a full repair.
Positive Feedback
Many drivers frankly praise the Xado additives. They claim that car systems work more stably and fully. Reduced noise and vibration levels. At the same time, fuel and oil consumption is significantly reduced. Even in severe frost, the engine starts easily.
It is not necessary to use such components in new cars. Only owners of used vehicles were able to appreciate the use of such compounds in the systems and components of the machine. The use of the presented additives, according to experts, certainly will not harm the car. However, in order not to throw money away, you should approach the use of the funds presented responsibly.
Having considered what the "Hado" additives are, we can note their high quality and unique principle of action. Their use in used cars is recognized as appropriate.
Recommended:
VARTA D59: specifications, features of use, advantages and disadvantages, reviews
The main purpose of a standard car battery is to fully power numerous devices with electricity. If the battery is chosen correctly, the engine will start easily even in cold weather. Today, there are many different batteries on sale, but the most popular is the VARTA D59 option
LIQUI MOLY grease: manufacturer, dosage, characteristics, composition, features of use and reviews of motorists
High-performance operation of expensive modern equipment is ensured by special lubricants. The impossibility of using conventional oils in mechanisms causes the need for greases. Liqui Moly products provide efficient and long-term operation of the main mechanisms, protecting them from wear and friction
Oil additives: reviews. All types of car oil additives
Any self-respecting motorist at least once in his life thought about the mixtures that are added to the oil to improve its properties. In order to understand what oil additives are, you first need to understand how important fuels and lubricants are for your car
Carboxylate antifreeze: manufacturer, dosage, characteristics, composition, features of use and reviews of motorists
Coolants are produced by many manufacturers. To understand this abundance, to choose the right antifreeze that will not harm the engine and will not cause serious damage, this article will help
Additives for the engine "Suprotek": reviews, types, rules of use
What additives for the Suprotec engine exist? What are the benefits of using these formulations? For what types of power plants are these auto chemical options suitable? What feedback do motorists and industry experts give about the additives presented?