What should be the volume of oil in the engine and how to determine its level?

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Engine oils are truly indispensable in a car, because their condition, properties, viscosity and degree of pollution determine the strength of a thin oil film, which provides parts with extreme pressure properties and absorbs all dirt and deposits. At the same time, this material protects the engine from corrosion, thereby increasing the service life of all its parts. Contaminated lubricant, on the contrary, only aggravates the operation of the cylinders, which can lead to a complete failure of the internal combustion engine. That is why it is so important to check the amount of oil in the engine and replace it in a timely manner. This article is devoted to this issue.

How often should the engine oil level be checked?

In general, experts recommend checking the oil volume at least once a week. Regular checking of its condition is the key to uninterrupted and well-coordinated operation of the motor. Fluid may leak out at any time. And no matter how expensive it may be, it doesn’t matter from thisno one is immune to trouble. It's good if you find this out within a week, but it's not uncommon for the engine oil volume to go unchecked for months. And then at one fine moment the pistons stop their work, the engine stalls and the car stops until the next replacement of the power plant. Therefore, you need to check the amount of oil in the engine every week.

How much fluid should I put in my car?

We note right away that there is no single value for all machines. Each car has its own power and engine size, respectively, each car will absorb oil in different ways. You can find out how much it needs to be poured in the instruction manual. So, for example, on a Daewoo Lanos car, the engine oil volume is 3.8 liters. On a Mercedes Vario commercial truck, this value is 15.8 liters. By the way, the oil volume in the Mercedes ‘a Atego engine is also 15.8 liters.

It is also worth noting that when filling the liquid, it is necessary to add a few more milliliters of oil. This is done so that the product completely penetrates the filters and other elements.

How to check engine oil level?

This operation will not take you more than 5 minutes of free time. And all you need from the tools is a couple of napkins or a piece of unnecessary rags. So, we tear off the hood and find a special dipstick that measures the amount of oil in the engine. It is not difficult to find him. As a rule, the probe is located near the distributor, on the right side. Sometimes it is located infront of the engine. This is a long plastic pen with a flattened metal needle.

We pull it out, take a piece of cloth and clean the dipstick from oil. Then we lower it again and after 3-5 seconds we pull it out. There is a value scale on the spoke, where the current oil level in the internal combustion engine is indicated. If the value is at the MID or MAX point, everything is fine. If the oil is at the LOW level, it should be topped up. And you need to fill in only the liquid that is in the engine. That is, for "synthetics" we fill in only "synthetics". Such oil does not need to be poured into mineral water.